Sorry, your browser doesn't support Java(tm).  

"Why Do We Build The Best Pool"

Below Are The Engineering Secrets That Make Us The Finest Quality Pool Builder in All of Southern California

Here's Just A Few Reasons

(For Specialty Pools That Require Engineering Due to Slopes, Unstable Ground or Freestanding Design).



Download Whisperflow Pump Manual
 

  • We Use 4500 PSI Shotcrete:

    • Pool shell is more resistant to hydraulic pressures and structural stress factors - Increases the structural
    • integrity if the Pool Shell, especially during ground movement and earthquakes. Code: Not Required

  • Our Pool Is Tied at 6" on Center "OC"

    • Increases structural integrity of the pool shell, minimizing the possibility of pool shell cracking, separating and leaking water. Code: Not Required
  • Engineering Pool or Caissons
    • Keeps the pool anchored in the ground reducing the possibility of the pool sliding down a slope, popping out of the ground or setting out of level. Code: Not Required

  • Solid Steel Cage Around Skimmer

    • Completely eliminate the possibility of the skimmer moving, separating from the pool and leaking out water -saving thousands of dollars in damage and repair bills. Code: 3# Bars of steel
  • We Waterproof Gunite Under The Tile Brown Coat
    • Eliminates the possibility of the water leaking out of the pool due to cracks in tile brown coat. Code: Not Required
  • We Waterproof Gunite on Raised Bond Beams
    • Eliminates water in raised planters from leaking into the pool through the tile grout joints, which eliminates the ugly looking white calcium buildup on the tiles and grout joints. Code: Not Required
  • We Use Acrylic Addmix In Our Thinset
    • This bonds the tile to the pool much better, doubling the years your tile bond to the pool. Code: Not Required

  • We Use Acrylic And Anti Hydrate Addmix in Tile Grout

    • Increases the bond, extra water proof protection, reduces grout cracking, grout stays cleaner and is also easier to clean if necessary. Code: Not Required

  • All Light Niches, Return Lines And Spa Jets Are Waterproofed Prior to Plaster

    • Reduces the possibility of water leaking out of the pool or spa. Makes for nicer cleaner installation of hardware. Code: Not Required

  • All Pool Plumbing Is Coated with Primer Prior To Gluing

    • Primer completely cleans and softens the glue fittings for stronger adhesions. Reducing the possibility of Plumbing Leaks. Code: Not Required

  • We Pressure Test Our Plumbing To 50 PSI

    • This Additional Pressure insures that all glue fittings are completely glued and connected. This gives your plumbing added protections that it will not come apart even under extreme conditions. Code: 35 PSI

 

 

Home | About | Pricing | Gallery | Step by Step Images | Cost Structure | Why Us? | Contact Us

Copyright 2005-2006 SplashPoolsnSpas all rights reserved